--- hardware/cores/arduino/Makefile	2008-09-20 20:15:27.000000000 -0700
+++ hardware/cores/arduino/Makefile	2008-09-20 20:22:19.000000000 -0700
@@ -37,8 +37,8 @@
 # $Id: Makefile-0011.patch,v 1.1 2008/09/21 05:03:07 solar Exp $
 
 TARGET = foo
-INSTALL_DIR = /Users/dmellis/Source/arduino/trunk/build/macosx/build/work
-PORT = /dev/tty.usb*
+INSTALL_DIR = /usr/share/arduino-0011/
+PORT = /dev/ttyUSB1
 UPLOAD_RATE = 19200
 AVRDUDE_PROGRAMMER = stk500v1
 MCU = atmega168
@@ -48,7 +48,7 @@
 # Below here nothing should be changed...
 
 ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino
-AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin
+AVR_TOOLS_PATH = /usr/bin
 SRC =  $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
 $(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
 $(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \
@@ -89,13 +89,13 @@
 CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
 CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
-LDFLAGS = -lm
+LDFLAGS = -L/usr/avr/lib -lm
 
 
 # Programming support using avrdude. Settings and variables.
 AVRDUDE_PORT = $(PORT)
 AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
+AVRDUDE_FLAGS = -V -F -C /etc/avrdude.conf \
 -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
 -b $(UPLOAD_RATE)